| 1.0/2.3
SERIES |
|
SUHNER
Coaxial "Inserts" 1.0/2.3 according
to DIN 41626/2 for the insertion of mixed layout
connectors DIN 41612 (pattern M). The 1.0/2.3
inserts feature a slide-on coupling mechanism,
which ensures a short connect-disconnect time.
Impedance accuracy, fast and easy assembly as
well as high reproducibility due to the full
crimp cable entry are typical characteristics
of these SUHNER connectors. The 1.0/2.3 inserts
are suitable for applications up to 4 GHz. |
|
| 716
SERIES |
|
SUHNER 7/16 connectors
are mechanically very rugged coaxial connectors
with screw lock. The have a characteristic impedance
of 50 Ω and are applicable with excellent
electrical properties up to 7.5 GHz. Transmission
of medium to high power in transmitting stations
and low loss transmission of received signals
such as in mobile phone base stations are typical
applications. For these purposes low intermodulation
product and waterproof types are also available. |
|
| BMA
SERIES |
|
SUHNER BMA blind
mate connectors open up special dimensions in
microwave applications up to 22GHz. SUHNER offers
a range of connectors for fixed as well as “floating” configurations
with any axial or radial misalignment taken out
by the outer contact of the jacks. The BMA series
presents an outstanding range of products featuring
high reliability and ease of assembly. |
|
| BNC
50 SERIES |
|
SUHNER BNC 50
ohm series is still one of the most popular
connector series, featuring a two stud bayonet
coupling mechanism, which is particularly useful
for frequently coupled and uncoupled RF connections
with frequencies up to 4 GHz.
Compatibility
50 Ω BNC connectors and 75 Ω BNC connectors are intermateable
without any restrictions.
|
|
| BNC
75 SERIES |
|
SUHNER BNC 75 ohm
series featuring a two-stud bayonet coupling
mechanism that is particularly useful for frequently
coupled and uncoupled RF connections. Within
the internationally standardized BNC mating face
dimensions a perfect 75 Ω characteristic
impedance cannot be realised. However, at frequencies
up to 1 GHz the small impedance deviation is
negligible for any application. A typical VSWR
of 1.15 at 1 GHz is achieved. Compatibility 75 Ω BNC
connectors and 50 Ω BNC connectors are
intermateable without any restrictions. |
|
| BNO
SERIES |
|
SUHNER BNO twin
connectors are two pin bayonet coupled connectors
for use with balanced twin-conductor cables with
75Ω to 130 Ω impedance. They have
polarised contacts and are not intermateable
with BNC. The SUHNER BNO twin connectors are
suitable for applications up to 200 MHz. |
|
| BNT
SERIES |
|
SUHNER BNT triaxial
connectors are RF connectors with a bayonet coupling
mechanism and three concentric contacts (inner
conductor, inner screen and outer screen) for
triaxial cables. SUHNER BNT connectors are intermateable
with BNC connectors, but the inner conductor
and outer screen are connected only. BNT connectors
are suitable for applications up to 3 GHz. |
|
| MCX
50 SERIES |
|
MCX 50 Ω miniature
snap-on connectors from SUHNER offer you an excellent
blend of size, weight, durability and performance
for applications such as mobile and fixed telecommunications,
in GPS applications and in Test+Measurement systems
for testing instruments and apparatus. They are
designed for frequencies up to 6 GHz and are
tested according to the international standard
CECC 22220. And they meet all the high requirements
that micro coaxial connectors are expected to
satisfy today. |
|
| MCX
75 SERIES |
|
SUHNER MCX 75 Ω connectors
are derived from the MCX 50 Ω series but
have a characteristic impedance of 75Ω.
They offer outstanding electrical properties
up to 6GHz and allow the transmission of digital
signals with high bit rates. |
|
| MHV
SERIES |
|
SUHNER MHV connectors
are coaxial miniature high voltage (MHV= Miniature
High Voltage) connectors with 5 kV rms test voltage
(mated pairs). The MHV connectors have a working
voltage up to 1.6 kV rms in mated condition and
are suitable for applications up to 300 MHz.
MHV connectors are of similar design to BNC connectors
but the insulators protrude over the outer contacts
to give a degree of shock-protection when unmated.
However, if a high degree of shock protection
in the unmated condition is required, use of
series SHV is recommended. |
|
| MMBX
SERIES |
|
Modularity with
a minimum space requirement is demanded for the
existing and coming generation of systems (GSM
900 / 1800 / 1900, PCS, WCDMA, UMTS). To achieve
this for all different systems, the smallest
possible components must be used also for interconnections.
In order to reduce the variety of products and
to achieve standardised systems (in other words:
modularity), the new SUHNER Series MMBX™ (Micro
Miniature Board Connector) contains a range of
board and cable connectors that require a minimum
of space. It offers all the necessary characteristics
to obtain a unified design of the various systems. |
|
| MMCX
SERIES |
|
SUHNER MMCX connectors
are intended for use in applications where the
smallest dimensions have to be achieved. MMCX
connectors can be used in applications from DC
to 6 GHz. The reliable ”snap-on” coupling
mechanism ensures that the electrical parameters
are consistently reproduced. Due to its non-slotted
outer contact, the MMCX series provides a low
RF-leakage. |
|
| N
50 SERIES |
|
SUHNER N connectors
are available with 50 Ω and 75 Ω impedance.
The frequency range extends to 18GHz, depending
on the connector and cable type. The screw-type
coupling mechanism provides a sturdy and reliable
connection. SUHNER N connectors are available
for flexible cables, for semi-rigid cables
and for corrugated copper tube cables. Cable
entries: clamp, crimp and solder types available,
as well as SUHNER QUICK-FIT for corrugated
copper tube cables.
Compatibility
Inner conductors of N 75 Ω connectors have a smaller diameter
than those of the 50 Ω version. Therefore 50 Ω and
75 Ω connectors must not be mated with each other.
|
|
| N
75 SERIES |
|
SUHNER N connectors
are available with 50 Ω and 75 Ω impedance.
The SUHNER N 75 Ω connectors are suitable
for applications up to 1.5 GHz. The screw-type
coupling mechanism provides a sturdy and reliable
connection. SUHNER N75Ωconnectors are
available in many different patterns.
Compatibility
Center conductors of N 75 Ω connectors have a smaller diameter
than those of the 50 Ω version. Therefore 50 Ω and
75 Ω connectors must not be mated with each other.
|
|
| PC
3.5 SERIES |
|
SUHNER PC 3.5 connectors
are precision connectors for use in microwave
applications up to 33 GHz. They are especially
suitable for use with semi-rigid cables and microwave
components. They are intermateable with SMA and
SK connectors. Due to an air dielectric interface
and the more durable construction a superior
repeatability further enhances the performance. |
|
| QLA
00 SERIES |
|
The QLA 00 series
contains connectors with a quick latch coupling
mechanism: connection is achieved by simply
pushing the plug into the jack. Three latching
springs automatically engage, thereby securing
the mated connectors against axial and rotational
forces. No twisting action is required. The
connectors are easily released by slightly
pulling back the outer sleeve of the plug.
This coupling mechanism provides a fast and
reliable connection for applications up to
1.4 GHz.
Compatibility
All connectors of the series QLA 00 are without any restrictions
intermateable with Lemo series 00.250.
|
|
| QMA
SERIES |
|
SUHNER QMA coaxial
connectors are available with 50 Ω impedance.
The frequency range extends to 11 GHz, depending
on the connector and cable type, however most
of the QMA connectors are Return Loss optimized
for frequencies up to 6 GHz. The interface is
based on the SMA dimensions, but instead of a
threaded coupling mechanism, a new snap-lock
mechanism is used. The QMA inteface has a very
similar performance to the SMA, but in addition
it offers an easier, faster and safer coupling
operation, helping the customers to save significant
time during production of their systems. The
packaging density of QMA is increased compared
to SMA connectors thanks to the fact that no
torque spanner is required to fasten the coupling
nut. QMA is not intermateable with SMA. |
|
| QN
SERIES |
|
SUHNER QN offers
the following advantages:
- User friendly and secure mounting
- Same performance as N but much easier and faster to mount
- Higher packaging and self alignment of angle connectors
- Cost effective interconnection solution for innovative RF
- Applications
- Available from two leading RF- Experts |
|
| QUICKFIT
SERIES |
|
SUHNER QUICK-FIT
connectors are worldwide-approved N and 7/16
connectors for foam dielectric corrugated copper
tube cables. They offer a greatly simplified
and economic approach to cable preparation and
assembly. The product line meets the requirements
of multi-carrier, high-channel- count transceivers
such as base stations of today’s mobile
communication infrastructure networks. The cable
entries support standard foam dielectric corrugated
copper tube cables 3/8” 1/2”, 7/8”,
11/4” and 15/8” and 1/2” highflex
SUCOFEED as well as equivalent products from
Andrew, Kabelmetal and NK-Cables. |
|
| SHV
SERIES |
|
SUHNER SHV (Safe
High Voltage) connectors provide more secure
handling: center contacts are well recessed to
prevent shock hazards in unmated condition. All
inner contacts are fully captivated and will
withstand axial forces of 100N minimum. When
mating a connector pair the outer conductor contact
is made prior to the inner conductor contacts.
SHV connectors are suitable for all high voltage
applications up to 5 kV DC or 3.5 kV rms. These
connectors are typically used in nuclear instruments
or test and measurement equipment. Voltages are
valid for both, the mated and the unmated condition. |
|
| SK
SERIES |
|
SUHNER SK connectors
are precision connectors for microwave applications
up to 40 GHz. SK connectors are intermateable
with series SMA and PC 3.5. They have a high
mechanical stability and an excellent repeatability.
The shortened male pin ensures a non-destructive
mating process. The glass beads, when used in
conjunction with the SK launchers, enable the
connectors to be replaced without disturbing
the hermetic seal. For a mechanical decoupling
between glass bead and internal microwave circuit,
stress relief contacts are available. |
|
| SMA
SERIES |
|
SUHNER SMA connectors
are precision connectors for microwave applications
up to 18 GHz/ 26.5 GHz. They distinguish themselves
through their high mechanical strength, high
durability, high reliability and low VSWR. SMA
launchers are the preferred connection element
for varied microwave circuits. There is a huge
variety of applications for SUHNER SMA connectors,
such as mobile communication, test & measurement,
instruments, avionics, etc. |
|
| SMB
SERIES |
|
The SUHNER subminiature
connectors Series SMB, SMC, SMS have the same
basic design. They only differ with regard
to their coupling mechanism. SUHNER SMB subminiature
connectors are suitable for applications from
DC up to 4 GHz.
Coupling mechanism:
The SMB snap-on mechanism provides a fast and reliable connection
for applications with high packing density.
|
|
| SMC
SERIES |
|
The SUHNER SMC
subminiature connector series is based on the
same design as the SMB and SMS series. But
due to its screw-on coupling mechanism, the
SUHNER SMC subminiature connectors are suitable
for applications up to 10 GHz.
Coupling mechanism:
The SMC’s screw-on mechanism permits a vibration proof connection
suitable for semi-permanent connections and for use in mobile equipment
with low VSWR requirements.
|
|
| SMPX
SERIES |
|
The SMPX series
is 100% compatible with the SMP series and GPO™ and
meets the specifications according to DESC 94007
and 94008. The series includes connectors for
mounting on both cables and PCB’s as well
as on the required test adaptors. The available
connectors suit semi-rigid and SUCOFORM hand-formable
cables. They are also available fitted onto cable
as custom assemblies, including SUCOFLEX flexible
microwave types. |
|
| SMS
SERIES |
|
SUHNER SMS connectors
are used in applications requiring rapid connection
and disconnection, even where space is limited.
The small physical size of the connector allows
a high packing density to be achieved. The low
engaging and disengaging forces due to the slide-on
mechanism make these connectors specially suited
for rack or panel systems. These connectors are
suitable for applications up to 4 GHz. The SMB,
SMC and SMS series have an identical inner construction,
but a different coupling mechanism. In accordance
with the international specifications, plugs
are fitted with female center contacts and jacks
with male center contacts. To increase the voltage
rating, all insulators overlap. |
|
| TNC
50 SERIES |
|
SUHNER TNC connectors
are threaded RF connectors applicable from
DC up to 11 GHz. Precision designs using a
dielectric bead are suitable for use up to
18 GHz. The threaded coupling mechanism improves
control over the interface dimensions and allows
them to be used under a higher environmental
load than BNC, especially under a high vibration
load.
Compatibility
75 Ω TNC connectors and 50 Ω TNC connectors are intermateable
without restrictions.
|
|
| TNC
75 SERIES |
|
Within the internationally
standardized TNC mating £ face dimensions
a perfect 75 Ω characteristic impedance
cannot be realized. However, at frequencies up
to 1 GHz the small impedance deviation is negligible
for practical applications. A typical VSWR of
1.15 at 1 GHz is achieved. The threaded coupling
mechanism allows them to be used under higher
environmental load than BNC. Compatibility 75 Ω TNC
connectors and 50 Ω TNC connectors are
intermateable without restrictions. |
|
