At InTELCOM Services we can meet your customised coaxial cable assembly requirements by cutting, terminating and testing cables to your specification.

We maintain stocks of most commonly used cable and connectors ensuring a quick turnaround of cable assembly orders.

Many connector types are supported e.g.:

The following are some of the more common braided or foil screened cable types supported:

· 50 ohm PE coax e.g. RG58, RG174, RG213, RG214, RG223, LMR400
· 50 ohm PTFE coax e.g. RG141, RG178, RG316, K02254D
· 50 ohm Enviroflex e.g. EF316D, EF142
· 75 ohm PE coax e.g. RG11, RG59
· 75 ohm PTFE coax e.g. RG179

Corrugated coaxial cables are also supported:

· 1/2 “
· 1/2” Hi-Flex
· 7/8”
· 1 5/8”

Semi-rigid coaxial cables are also supported with InTELCOM’s inductive and resistive soldering facilities e.g.

· EZ86, EZ141
· SM86, SM141
· MF86, MF141

As all cables are cut and stripped on automatic machinery, a high consistent standard is maintained. All cables can be labelled to your specifications.

To help us prepare a quotation for your next assembly requirement, please the following information:

1. Cable type preferred
2. Connector End-A
3. Connector End-B
4. Overall Length from end to end (ends of connector bodies)
5. Label information if desired
6. Any other special requirements

Heatshrink is normally used on connector ferrules unless requested otherwise.

If you are unsure of the cable you should use, or have an unfamiliar connector/assembly you need duplicated, then and we can help design the assembly or match the connectors required.